Download SolidProfessor Solidworks Video Training 2013 Torrent

Torrent Contents Size: 5.66 GB

SolidProfessor Solidworks Video Training 2013

CAMWorks

2013CAMWorksMill

01.Introduction to CAMWorks Milling - 01.CAMWorks Interface.mp4	MP4	3.25 MB
01.Introduction to CAMWorks Milling - 02.Process Overview.mp4	MP4	1.93 MB
02.CAMWorks 2.5 Axis Milling - 01.Intro to 2.5 Axis Milling.mp4	MP4	989.23 KB
02.CAMWorks 2.5 Axis Milling - 02.Defining the Machine.mp4	MP4	7.83 MB
02.CAMWorks 2.5 Axis Milling - 03.Defining the Stock - Bounding Box.mp4	MP4	3.86 MB
02.CAMWorks 2.5 Axis Milling - 04.Defining Stock from STL.mp4	MP4	2.16 MB
02.CAMWorks 2.5 Axis Milling - 05.Defining the Stock - Sketch.mp4	MP4	6.69 MB
02.CAMWorks 2.5 Axis Milling - 06.Defining Features Automatically.mp4	MP4	8.14 MB
02.CAMWorks 2.5 Axis Milling - 07.Defining Features Interactively.mp4	MP4	6.47 MB
02.CAMWorks 2.5 Axis Milling - 08.Generate Operation Plan.mp4	MP4	5.88 MB
02.CAMWorks 2.5 Axis Milling - 09.Program Zero.mp4	MP4	3.35 MB
02.CAMWorks 2.5 Axis Milling - 10.Generating Toolpaths.mp4	MP4	2.05 MB
02.CAMWorks 2.5 Axis Milling - 11.Simulate Toolpaths.mp4	MP4	8.9 MB
02.CAMWorks 2.5 Axis Milling - 12.Reordering Operations.mp4	MP4	1.4 MB
02.CAMWorks 2.5 Axis Milling - 13.Operation Parameters - Tool Adjustments.mp4	MP4	5.03 MB
02.CAMWorks 2.5 Axis Milling - 14.Operation Parameters - Feeds and Speeds.mp4	MP4	1.81 MB
02.CAMWorks 2.5 Axis Milling - 15.Adjusting Operations - Roughing A.mp4	MP4	10.6 MB
02.CAMWorks 2.5 Axis Milling - 16.VoluMill.mp4	MP4	7.83 MB
02.CAMWorks 2.5 Axis Milling - 17.Adjusting Operations - Roughing B.mp4	MP4	7.74 MB
02.CAMWorks 2.5 Axis Milling - 18.Adjusting Operations - NC Parameters.mp4	MP4	3.63 MB
02.CAMWorks 2.5 Axis Milling - 19.Feature Options.mp4	MP4	10.98 MB
02.CAMWorks 2.5 Axis Milling - 20.Optimizing Toolpaths.mp4	MP4	7.26 MB
02.CAMWorks 2.5 Axis Milling - 21.Contour Operations.mp4	MP4	12.66 MB
02.CAMWorks 2.5 Axis Milling - 22.Creating Setup Sheets.mp4	MP4	3.1 MB
02.CAMWorks 2.5 Axis Milling - 23.Post Processing Toolpaths.mp4	MP4	4.7 MB
02.CAMWorks 2.5 Axis Milling - 24.Inserting Additional Operations.mp4	MP4	5.58 MB
02.CAMWorks 2.5 Axis Milling - 25.Sorting Operations.mp4	MP4	4.9 MB
02.CAMWorks 2.5 Axis Milling - 26.Combining & Linking Operations.mp4	MP4	5.33 MB
02.CAMWorks 2.5 Axis Milling - 27.Inserting Avoid Areas.mp4	MP4	9.23 MB
02.CAMWorks 2.5 Axis Milling - 28.Inserting Contains.mp4	MP4	3.84 MB
02.CAMWorks 2.5 Axis Milling - 29.Part Exercise - A.mp4	MP4	7.93 MB
02.CAMWorks 2.5 Axis Milling - 30.Part Exercise - B.mp4	MP4	4.66 MB
02.CAMWorks 2.5 Axis Milling - 31.Part Exercise - C.mp4	MP4	4.22 MB
03.Machinable Features - 01.2.5 Axis Features.mp4	MP4	714.21 KB
03.Machinable Features - 02.Machinable Features.mp4	MP4	2.23 MB
03.Machinable Features - 03.Face.mp4	MP4	2.38 MB
03.Machinable Features - 04.Pockets - I.mp4	MP4	7.51 MB
03.Machinable Features - 05.Pockets - II.mp4	MP4	4.71 MB
03.Machinable Features - 06.Pockets III.mp4	MP4	3.74 MB
03.Machinable Features - 07.Bosses.mp4	MP4	7.96 MB
03.Machinable Features - 08.Part Perimeter.mp4	MP4	4.16 MB
03.Machinable Features - 09.Open Profile.mp4	MP4	3.36 MB
03.Machinable Features - 10.Slots.mp4	MP4	2.82 MB
03.Machinable Features - 11.Holes.mp4	MP4	3.79 MB
03.Machinable Features - 12.Linear Feature Pattern.mp4	MP4	6.43 MB
03.Machinable Features - 13.Circular Feature Pattern.mp4	MP4	5.56 MB
03.Machinable Features - 14.Engraving.mp4	MP4	4.64 MB
04.CAMWorks Customization - 01.Setting up CAMWorks.mp4	MP4	2.72 MB
04.CAMWorks Customization - 02.Adding Machines.mp4	MP4	4.38 MB
04.CAMWorks Customization - 03.User Defined Strategies - A.mp4	MP4	16.38 MB
04.CAMWorks Customization - 04.User Defined Strategies - B.mp4	MP4	7.1 MB
04.CAMWorks Customization - 05.Adding Tools.mp4	MP4	4.33 MB
04.CAMWorks Customization - 06.Setting up Tool Cribs.mp4	MP4	3.95 MB
04.CAMWorks Customization - 07.Linking the Database.mp4	MP4	2.77 MB
04.CAMWorks Customization - 08.Restoring the Database.mp4	MP4	3.42 MB
04.CAMWorks Customization - 09.CAMWorks Options.mp4	MP4	7.14 MB

2013CAMWorksTurn

01.Introduction to CAMWorks - 01.CAMWorks Interface.mp4	MP4	3.25 MB
01.Introduction to CAMWorks - 02.Process Overview.mp4	MP4	1.93 MB
02.Turning - 01.Introduction.mp4	MP4	723.88 KB
02.Turning - 02.Defining the Machine.mp4	MP4	9.3 MB
02.Turning - 03.Setup Tab.mp4	MP4	3.45 MB
02.Turning - 04.Defining the Stock - Bar Stock.mp4	MP4	3.4 MB
02.Turning - 05.Defining the Stock WIP file and STL.mp4	MP4	1.87 MB
02.Turning - 06.Defining the Stock Revolve Sketch.mp4	MP4	4.6 MB
02.Turning - 07.Defining Features Automatically.mp4	MP4	3.57 MB
02.Turning - 08.Defining Features Interactively.mp4	MP4	6.2 MB
02.Turning - 09.Generating an Operation Plan.mp4	MP4	5.44 MB
02.Turning - 10.Generating Tool Paths.mp4	MP4	1.89 MB
02.Turning - 11.Simulating Tool Paths.mp4	MP4	10.33 MB
02.Turning - 12.Tool Adjustments.mp4	MP4	6.04 MB
02.Turning - 13.Roughing Options.mp4	MP4	6.99 MB
02.Turning - 14.Finishing Options.mp4	MP4	4.27 MB
02.Turning - 15.Rough Grooving Options.mp4	MP4	10.2 MB
02.Turning - 16.Finish Grooving Options.mp4	MP4	1.81 MB
02.Turning - 17.NC Options.mp4	MP4	6.52 MB
02.Turning - 18.Leadin Leadout Options.mp4	MP4	3.34 MB
02.Turning - 19.Create Setup Sheets.mp4	MP4	3.59 MB
02.Turning - 20.Post Processing.mp4	MP4	4.35 MB
02.Turning - 21.Inserting Operations.mp4	MP4	5.11 MB
02.Turning - 22.Setting Up a Chuck.mp4	MP4	8.89 MB
03.Turning Exercise - 01.Part Exercise 1A.mp4	MP4	2.84 MB
03.Turning Exercise - 02.Part Exercise 1B.mp4	MP4	8.36 MB
03.Turning Exercise - 03.Part Exercise 1C.mp4	MP4	10.32 MB
04.Turn Features - 01.Face Feature.mp4	MP4	2.78 MB
04.Turn Features - 02.OD Feature.mp4	MP4	3.98 MB
04.Turn Features - 03.Grooves.mp4	MP4	2.61 MB
04.Turn Features - 04.ID Feature.mp4	MP4	2.83 MB
04.Turn Features - 05.Cutoff Feature.mp4	MP4	3.62 MB

FILES

2013-AdvancedAssemblies.zip	ZIP	62.52 MB
2013-AdvancedParts.zip	ZIP	30.1 MB
2013-CAMWorksMill-3Axis.zip	ZIP	11.23 MB
2013-CAMWorksMill.zip	ZIP	5.39 MB
2013-CAMWorksTurn.zip	ZIP	1.35 MB
2013-CSWAPrepCourse.zip	ZIP	3.08 MB
2013-CSWPCSWEPrepCourse.zip	ZIP	12.62 MB
2013-CoreConcepts.zip	ZIP	24.88 MB
2013-Drawings.zip	ZIP	11.68 MB
2013-FileManagement.zip	ZIP	2.26 MB
2013-MoldTools.zip	ZIP	10.83 MB
2013-PhotoView360.zip	ZIP	98.6 MB
2013-SheetMetal.zip	ZIP	6.97 MB
2013-SimulationXpress.zip	ZIP	2.16 MB
2013-SolidWorksForBeginners.zip	ZIP	3.08 MB
2013-SurfacingEssentials.zip	ZIP	6.83 MB
2013-TolAnalyst.zip	ZIP	3.54 MB
2013-ToolboxandDesignLibrary.zip	ZIP	2.44 MB
2013-VisualizationandAppearances.zip	ZIP	150.84 MB
2013-Weldments.zip	ZIP	4.04 MB

SolidWorks

Ask SolidProfessor

V100Q1.flv	FLV	39.67 MB
V101Q1.flv	FLV	15.97 MB
V102Q1.flv	FLV	21.05 MB
V103Q1.flv	FLV	18.18 MB
V104Q1.flv	FLV	13.74 MB
V105Q1.flv	FLV	19.47 MB
V106Q1.flv	FLV	11.53 MB
V107Q1.flv	FLV	13.12 MB
V108Q1.flv	FLV	12.09 MB
V109Q1.flv	FLV	14.98 MB
V10Q1.flv	FLV	2.83 MB
V10Q2.flv	FLV	1.67 MB
V110Q1.flv	FLV	27.51 MB
V111Q1.flv	FLV	16.32 MB
V112Q1.flv	FLV	22.6 MB
V113Q1.flv	FLV	18.53 MB
V114Q1.flv	FLV	31.84 MB
V115Q1.flv	FLV	12.02 MB
V116Q1.flv	FLV	23.24 MB
V117Q1.flv	FLV	27.88 MB
V118Q1.flv	FLV	54.32 MB
V119Q1.flv	FLV	16.91 MB
V11Q1.flv	FLV	2.2 MB
V11Q2.flv	FLV	3.22 MB
V11Q3.flv	FLV	4.95 MB
V120Q1.flv	FLV	14.03 MB
V121Q1.flv	FLV	21.38 MB
V122Q1.flv	FLV	13.55 MB
V123Q1.flv	FLV	12.12 MB
V124Q1.flv	FLV	17.85 MB
V125Q1.flv	FLV	11.77 MB
V126Q1.flv	FLV	6.44 MB
V127Q1.flv	FLV	10.35 MB
V128Q1.flv	FLV	5.15 MB
V129Q1.flv	FLV	9.64 MB
V12Q1.flv	FLV	3.11 MB
V12Q2.flv	FLV	2.83 MB
V12Q3.flv	FLV	8.38 MB
V130Q1.flv	FLV	5.58 MB
V131Q1.flv	FLV	8.49 MB
V132Q1.flv	FLV	7.12 MB
V133Q1.flv	FLV	7.05 MB
V134Q1.flv	FLV	7.48 MB
V135Q1.flv	FLV	10.13 MB
V136Q1.flv	FLV	6.79 MB
V137Q1.flv	FLV	5.34 MB
V138Q1.flv	FLV	7.93 MB
V139Q1.flv	FLV	10.11 MB
V13Q1.flv	FLV	6.38 MB
V13Q2.flv	FLV	2.97 MB
V13Q3.flv	FLV	1.75 MB
V140Q1.mp4	MP4	7.46 MB
V141Q1.mp4	MP4	13.96 MB
V142Q1.mp4	MP4	6.52 MB
V143Q1.mp4	MP4	11.54 MB
V144Q1.mp4	MP4	6.06 MB
V145Q1.mp4	MP4	12.76 MB
V146Q1.mp4	MP4	4.84 MB
V147Q1.mp4	MP4	12.95 MB
V148Q1.mp4	MP4	5.53 MB
V149Q1.mp4	MP4	8.33 MB
V14Q1.flv	FLV	4.06 MB
V14Q2.flv	FLV	2.28 MB
V14Q3.flv	FLV	4.68 MB
V150Q1.mp4	MP4	3.35 MB
V151Q1.mp4	MP4	3.93 MB
V15Q1.flv	FLV	7.85 MB
V15Q2.flv	FLV	5.29 MB
V15Q3.flv	FLV	7.84 MB
V16Q1.flv	FLV	3.08 MB
V16Q2.flv	FLV	2.75 MB
V16Q3.flv	FLV	3.47 MB
V17Q1.flv	FLV	4.17 MB
V17Q2.flv	FLV	6.43 MB
V17Q3.flv	FLV	4.36 MB
V18Q1.flv	FLV	3.56 MB
V18Q2.flv	FLV	4.54 MB
V18Q3.flv	FLV	3.95 MB
V19Q1.flv	FLV	1.74 MB
V19Q2.flv	FLV	2.06 MB
V1Q1.flv	FLV	3.58 MB
V1Q2.flv	FLV	5.87 MB
V1Q3.flv	FLV	6.17 MB
V20Q1.flv	FLV	3.14 MB
V20Q2.flv	FLV	4.64 MB
V20Q3.flv	FLV	3.59 MB
V21Q1.flv	FLV	3.17 MB
V21Q2.flv	FLV	2.1 MB
V21Q3.flv	FLV	4.51 MB
V22Q1.flv	FLV	3.7 MB
V22Q2.flv	FLV	4.27 MB
V22Q3.flv	FLV	4.47 MB
V23Q1.flv	FLV	2.72 MB
V23Q2.flv	FLV	2.95 MB
V23Q3.flv	FLV	4.23 MB
V24Q1.flv	FLV	5.13 MB
V24Q2.flv	FLV	2.65 MB
V24Q3.flv	FLV	5.07 MB
V25Q1.flv	FLV	2.72 MB
V25Q2.flv	FLV	2.54 MB
V25Q3.flv	FLV	2.98 MB
V26Q1.flv	FLV	4.66 MB
V26Q2.flv	FLV	4.94 MB
V26Q3.flv	FLV	5.37 MB
V27Q1.flv	FLV	5.64 MB
V27Q2.flv	FLV	6.57 MB
V27Q3.flv	FLV	7.16 MB
V28Q1.flv	FLV	4.35 MB
V28Q2.flv	FLV	3.43 MB
V28Q3.flv	FLV	4.67 MB
V29Q1.flv	FLV	4.15 MB
V29Q2.flv	FLV	5.13 MB
V29Q3.flv	FLV	7.53 MB
V2Q1.flv	FLV	4.31 MB
V2Q2.flv	FLV	4.38 MB
V2Q3.flv	FLV	3.21 MB
V30Q1.flv	FLV	4.06 MB
V31Q1.flv	FLV	4.6 MB
V32Q1.flv	FLV	2.25 MB
V33Q1.flv	FLV	3.05 MB
V34Q1.flv	FLV	2.26 MB
V35Q1.flv	FLV	4.08 MB
V36Q1.flv	FLV	2.32 MB
V37Q1.flv	FLV	4.58 MB
V38Q1.flv	FLV	3.56 MB
V3Q1.flv	FLV	7.7 MB
V3Q2.flv	FLV	2.92 MB
V3Q3.flv	FLV	3.9 MB
V40Q1.flv	FLV	3.7 MB
V41Q1.flv	FLV	3.86 MB
V42Q1.flv	FLV	2.68 MB
V43Q1.flv	FLV	5.72 MB
V44Q1.flv	FLV	2.27 MB
V45Q1.flv	FLV	2.97 MB
V46Q1.flv	FLV	4.34 MB
V47Q1.flv	FLV	2.86 MB
V48Q1.flv	FLV	2.98 MB
V49Q1.flv	FLV	2.19 MB
V4Q1.flv	FLV	3.35 MB
V4Q2.flv	FLV	4.04 MB
V4Q3.flv	FLV	6.07 MB
V50Q1.flv	FLV	3.9 MB
V51Q1.flv	FLV	7.87 MB
V52Q1.flv	FLV	4.49 MB
V53Q1.flv	FLV	3.17 MB
V54Q1.flv	FLV	12.42 MB
V55Q1.flv	FLV	5.69 MB
V56Q1.flv	FLV	4.68 MB
V57Q1.flv	FLV	9.71 MB
V58Q1.flv	FLV	4.07 MB
V59Q1.flv	FLV	6.27 MB
V5Q1.flv	FLV	4.02 MB
V5Q2.flv	FLV	21.56 MB
V5Q3.flv	FLV	3.52 MB
V60Q1.flv	FLV	3.69 MB
V61Q1.flv	FLV	8.78 MB
V62Q1.flv	FLV	8.65 MB
V63Q1.flv	FLV	2.18 MB
V64Q1.flv	FLV	5.28 MB
V65Q1.flv	FLV	8.6 MB
V66Q1.flv	FLV	4.8 MB
V67Q1.flv	FLV	4.94 MB
V68Q1.flv	FLV	2.71 MB
V69Q1.flv	FLV	3.65 MB
V6Q1.flv	FLV	2.93 MB
V6Q2.flv	FLV	2.14 MB
V6Q3.flv	FLV	1.86 MB
V70Q1.flv	FLV	3.15 MB
V71Q1.flv	FLV	2.44 MB
V72Q1.flv	FLV	6.39 MB
V73Q1.flv	FLV	2.88 MB
V74Q1.flv	FLV	2.66 MB
V75Q1.flv	FLV	3.83 MB
V76Q1.flv	FLV	3.82 MB
V77Q1.flv	FLV	3.43 MB
V78Q1.flv	FLV	1.88 MB
V79Q1.flv	FLV	4.61 MB
V7Q1.flv	FLV	5.15 MB
V7Q2.flv	FLV	2.5 MB
V7Q3.flv	FLV	5.12 MB
V80Q1.flv	FLV	2.8 MB
V81Q1.flv	FLV	4.33 MB
V82Q1.flv	FLV	9.38 MB
V83Q1.flv	FLV	3.12 MB
V84Q1.flv	FLV	2.75 MB
V85Q1.flv	FLV	3.75 MB
V86Q1.flv	FLV	3.42 MB
V87Q1.flv	FLV	3.25 MB
V88Q1.flv	FLV	2.92 MB
V89Q1.flv	FLV	2.06 MB
V8Q1.flv	FLV	5.66 MB
V8Q2.flv	FLV	2.7 MB
V8Q3.flv	FLV	2.91 MB
V90Q1.flv	FLV	5.47 MB
V91Q1.flv	FLV	5.82 MB
V92Q1.flv	FLV	7.23 MB
V93Q1.flv	FLV	9.73 MB
V94Q1.flv	FLV	5.06 MB
V95Q1.flv	FLV	22.04 MB
V96Q1.flv	FLV	9.58 MB
V97Q1.flv	FLV	30.33 MB
V98Q1.flv	FLV	14.82 MB
V99Q1.flv	FLV	15.55 MB
V9Q1.flv	FLV	10.29 MB
V9Q2.flv	FLV	2.44 MB

SolidWorks 2013

2013 Advanced Assemblies

01.Assembly Structure - 01.Creating Sub-Assemblies.mp4	MP4	12.02 MB
01.Assembly Structure - 02.Flexible Sub-Assemblies.mp4	MP4	3.42 MB
01.Assembly Structure - 03.Empty Sub-Assemblies.mp4	MP4	2.99 MB
01.Assembly Structure - 04.Folders vs Sub-Assemblies.mp4	MP4	4.93 MB
01.Assembly Structure - 05.Sub-Assemblies in Drawings.mp4	MP4	3.69 MB
02.Assembly Features - 01.Assembly Feature.mp4	MP4	3.63 MB
02.Assembly Features - 02.Feature Scope.mp4	MP4	4.72 MB
02.Assembly Features - 03.Assembly Fillets.mp4	MP4	4.48 MB
02.Assembly Features - 04.Assembly Chamfers.mp4	MP4	3.99 MB
02.Assembly Features - 05.Weld Beads.mp4	MP4	3.68 MB
02.Assembly Features - 06.Hole Series.mp4	MP4	6.21 MB
02.Assembly Features - 07.Smart Components.mp4	MP4	14.84 MB
02.Assembly Features - 08.Belts and Chains.mp4	MP4	6.67 MB
02.Assembly Features - 09.Swept Cut.mp4	MP4	1.89 MB
03.Component Patterns - 01.Linear Patterns.mp4	MP4	8.26 MB
03.Component Patterns - 02.Circular Patterns.mp4	MP4	4.2 MB
03.Component Patterns - 03.Feature Driven Patterns.mp4	MP4	5.73 MB
03.Component Patterns - 04.Mirroring Components.mp4	MP4	6.48 MB
04.Advanced Mate Types - 01.Symmetric Mate.mp4	MP4	2.57 MB
04.Advanced Mate Types - 02.Width Mate.mp4	MP4	4.65 MB
04.Advanced Mate Types - 03.Path Mate.mp4	MP4	2.38 MB
04.Advanced Mate Types - 04.Linear Coupler Mate.mp4	MP4	2.28 MB
04.Advanced Mate Types - 05.Cam Mate.mp4	MP4	4.05 MB
04.Advanced Mate Types - 06.Gear Mate.mp4	MP4	7.17 MB
04.Advanced Mate Types - 07.Rack and Pinion Mate.mp4	MP4	6.05 MB
04.Advanced Mate Types - 08.Screw Mate.mp4	MP4	3.27 MB
04.Advanced Mate Types - 09.Limit Mate.mp4	MP4	5.74 MB
04.Advanced Mate Types - 10.Hinge Mate.mp4	MP4	3.3 MB
04.Advanced Mate Types - 11.Mate References.mp4	MP4	4.41 MB
04.Advanced Mate Types - 12.Extracting Mate References.mp4	MP4	3.26 MB
04.Advanced Mate Types - 13.Mate Reference Pairs.mp4	MP4	6.42 MB
05.Troubleshooting Mates - 01.Assembly Mate Errors.mp4	MP4	5.37 MB
05.Troubleshooting Mates - 02.Repairing Mate Errors - A.mp4	MP4	5.22 MB
05.Troubleshooting Mates - 03.Repairing Mate Errors - B.mp4	MP4	4.93 MB
05.Troubleshooting Mates - 04.Mate Xpert.mp4	MP4	8.73 MB
05.Troubleshooting Mates - 05.Replace Mate Entities.mp4	MP4	7.8 MB
06.Assembly Configurations - 01.Assembly Configurations - Part A.mp4	MP4	3.55 MB
06.Assembly Configurations - 02.Assembly Configurations - Part B.mp4	MP4	6.06 MB
06.Assembly Configurations - 03.Advanced Options.mp4	MP4	11 MB
06.Assembly Configurations - 04.Automatic Part Configurations.mp4	MP4	8.45 MB
06.Assembly Configurations - 05.Assembly Design Tables Part A.mp4	MP4	6.91 MB
06.Assembly Configurations - 06.Assembly Design Tables Part B.mp4	MP4	5.32 MB
06.Assembly Configurations - 07.SpeedPak.mp4	MP4	7.54 MB
07.Top Down Assembly Design - 01.Introduction to Top Down Assembly Design.mp4	MP4	1.2 MB
07.Top Down Assembly Design - 02.Edit Part Mode.mp4	MP4	7.11 MB
07.Top Down Assembly Design - 03.Component Visibility.mp4	MP4	5.35 MB
07.Top Down Assembly Design - 04.In-Context Features Part A.mp4	MP4	6.97 MB
07.Top Down Assembly Design - 05.In-Context Features Part B.mp4	MP4	4.87 MB
07.Top Down Assembly Design - 06.Inserting a New Component.mp4	MP4	9.19 MB
07.Top Down Assembly Design - 07.Remove External References Part A.mp4	MP4	8.29 MB
07.Top Down Assembly Design - 08.Remove External References Part B.mp4	MP4	4.9 MB
07.Top Down Assembly Design - 09.Remove External References Part C.mp4	MP4	7.44 MB
07.Top Down Assembly Design - 10.No External References.mp4	MP4	2.28 MB
07.Top Down Assembly Design - 11.Virtual Components.mp4	MP4	6.76 MB

2013 Advanced Parts

01.Advanced Sketching - 01.Polygon.mp4	MP4	1.7 MB
01.Advanced Sketching - 02.Ellipse.mp4	MP4	2.61 MB
01.Advanced Sketching - 03.Partial Ellipse.mp4	MP4	2.75 MB
01.Advanced Sketching - 04.Parabola.mp4	MP4	3.13 MB
01.Advanced Sketching - 05.Conic.mp4	MP4	3.66 MB
01.Advanced Sketching - 06.Splines.mp4	MP4	4.58 MB
01.Advanced Sketching - 07.Splitting Entities.mp4	MP4	1.7 MB
01.Advanced Sketching - 08.Derived Sketches.mp4	MP4	3.46 MB
01.Advanced Sketching - 09.Sketch Xpert.mp4	MP4	4.61 MB
01.Advanced Sketching - 10.Sketch Picture.mp4	MP4	5.93 MB
01.Advanced Sketching - 11.AutoTrace.mp4	MP4	4.42 MB
01.Advanced Sketching - 12.3D Sketching Intro.mp4	MP4	5.34 MB
01.Advanced Sketching - 13.3D Sketching.mp4	MP4	8.76 MB
01.Advanced Sketching - 14.3D Sketch Planes.mp4	MP4	6.55 MB
02.Curves - 01.Helixes and Spirals.mp4	MP4	2.96 MB
02.Curves - 02.Curve Through XYZ Points.mp4	MP4	6.41 MB
02.Curves - 03.Composite Curve.mp4	MP4	2.65 MB
02.Curves - 04.Curve Through Reference Points.mp4	MP4	1.56 MB
02.Curves - 05.Projected Curves.mp4	MP4	2.87 MB
02.Curves - 06.Intersection Curves.mp4	MP4	3.93 MB
03.Advanced Fillets - 01.Fillet Options.mp4	MP4	6.18 MB
03.Advanced Fillets - 02.Variable Radius Fillets.mp4	MP4	8.96 MB
03.Advanced Fillets - 03.Face Fillets.mp4	MP4	2.2 MB
03.Advanced Fillets - 04.Hold Line Fillets.mp4	MP4	1.81 MB
03.Advanced Fillets - 05.Curvature Continuous Fillets.mp4	MP4	1.95 MB
03.Advanced Fillets - 06.Full Round Fillets.mp4	MP4	1.71 MB
03.Advanced Fillets - 07.Fillet Xpert.mp4	MP4	6.6 MB
03.Advanced Fillets - 08.Corner Xpert.mp4	MP4	4.58 MB
04.Sweeps - 01.Introduction to Sweeps.mp4	MP4	2.25 MB
04.Sweeps - 02.The Basic Sweep.mp4	MP4	7.31 MB
04.Sweeps - 03.Path Options.mp4	MP4	4.44 MB
04.Sweeps - 04.Guide Curves.mp4	MP4	6.35 MB
04.Sweeps - 05.Multiple Guide Curves.mp4	MP4	4.19 MB
04.Sweeps - 06.Profile Orientation.mp4	MP4	8.71 MB
04.Sweeps - 07.Twist.mp4	MP4	5.12 MB
04.Sweeps - 08.Swept Cut.mp4	MP4	3.31 MB
04.Sweeps - 09.Threads.mp4	MP4	13.08 MB
05.Lofts - 01.Introduction to Lofts.mp4	MP4	1.95 MB
05.Lofts - 02.The Basic Loft.mp4	MP4	8.04 MB
05.Lofts - 03.Closing a Loft.mp4	MP4	1.18 MB
05.Lofts - 04.Loft Profiles.mp4	MP4	4.7 MB
05.Lofts - 05.Start-End Constraints.mp4	MP4	8.08 MB
05.Lofts - 06.Guide Curves.mp4	MP4	4.35 MB
05.Lofts - 07.Profile Geometry.mp4	MP4	7.33 MB
05.Lofts - 08.Centerline.mp4	MP4	3.27 MB
05.Lofts - 09.Adding Loft Sections.mp4	MP4	4.12 MB
05.Lofts - 10.Cutting with a Loft.mp4	MP4	2.2 MB
06.Boundary Features - 01.Boundary Boss-Base.mp4	MP4	9.07 MB
06.Boundary Features - 02.Boundary Cut.mp4	MP4	2.51 MB
07.Dome and Wrap - 01.Dome.mp4	MP4	5.45 MB
07.Dome and Wrap - 02.Wrap.mp4	MP4	5.06 MB
08.Flex Feature - 01.Flex Feature Introduction.mp4	MP4	547.29 KB
08.Flex Feature - 02.Flex Overview.mp4	MP4	13.03 MB
08.Flex Feature - 03.Bending.mp4	MP4	5.82 MB
08.Flex Feature - 04.Twisting.mp4	MP4	1.78 MB
08.Flex Feature - 05.Tapering and Stretching.mp4	MP4	4 MB
09.Indent Feature - 01.Indent Feature.mp4	MP4	5.86 MB
09.Indent Feature - 02.Using Multiple Tool Bodies.mp4	MP4	3.28 MB
09.Indent Feature - 03.Multiple Tool Regions.mp4	MP4	3.12 MB
09.Indent Feature - 04.Surfaces and the Cut Option.mp4	MP4	1.73 MB
10.Multibody Parts - 01.Multibody Parts.mp4	MP4	4.45 MB
10.Multibody Parts - 02.Creating Multiple Bodies.mp4	MP4	3.36 MB
10.Multibody Parts - 03.Splitting Bodies A.mp4	MP4	4.56 MB
10.Multibody Parts - 04.Splitting Bodies B.mp4	MP4	7.76 MB
10.Multibody Parts - 05.Mulitbody Design Techniques.mp4	MP4	7.03 MB
10.Multibody Parts - 06.Combining Multiple Bodies.mp4	MP4	8.39 MB
10.Multibody Parts - 07.Intersect.mp4	MP4	5.79 MB
10.Multibody Parts - 08.Swept Cuts with Bodies.mp4	MP4	5.09 MB
10.Multibody Parts - 09.Additional Techniques.mp4	MP4	7.26 MB
10.Multibody Parts - 10.Positioning Bodies.mp4	MP4	6.31 MB
10.Multibody Parts - 11.Multibody Exploded View.mp4	MP4	6.81 MB

2013 CSWA-CSWP-CSWE Prep Course

01.SolidWorks Certification - 01.Why Get Certified.mp4	MP4	1.32 MB
01.SolidWorks Certification - 02.Preparing for the Exam.mp4	MP4	2.35 MB
01.SolidWorks Certification - 03.What is the CSWA.mp4	MP4	5.24 MB
01.SolidWorks Certification - 04.What is the CSWP.mp4	MP4	4.79 MB
01.SolidWorks Certification - 05.CSWE and Other Certifications.mp4	MP4	2.75 MB
01.SolidWorks Certification - 06.SolidWorks Versions.mp4	MP4	2.91 MB
01.SolidWorks Certification - 07.Purchasing and Setting Up the Exam.mp4	MP4	7.52 MB
01.SolidWorks Certification - 08.Test Taking Strategy.mp4	MP4	7.55 MB
01.SolidWorks Certification - 09.Modeling Question Preview.mp4	MP4	7.55 MB
01.SolidWorks Certification - 10.Practice Exams.mp4	MP4	1.68 MB
01.SolidWorks Certification - 11.Preparing for the Exam.mp4	MP4	5.8 MB
01.SolidWorks Certification - 12.Test Taking Strategy.mp4	MP4	8.78 MB
01.SolidWorks Certification - 13.Course Overview.mp4	MP4	1.17 MB
02.CSWA Part Model - 01.Where to Begin.mp4	MP4	3.98 MB
02.CSWA Part Model - 02.The Central Cylinder.mp4	MP4	12.95 MB
02.CSWA Part Model - 03.The Top Fork.mp4	MP4	10.94 MB
02.CSWA Part Model - 04.The Lower Fork.mp4	MP4	7.76 MB
02.CSWA Part Model - 05.Adding Fillets.mp4	MP4	3.74 MB
02.CSWA Part Model - 06.Answering the Question.mp4	MP4	5.82 MB
02.CSWA Part Model - 07.Updating the Geometry.mp4	MP4	3.17 MB
03.CSWA Assembly Model - 01.Problem Overview.mp4	MP4	4.55 MB
03.CSWA Assembly Model - 02.Modeling the Parts.mp4	MP4	8.07 MB
03.CSWA Assembly Model - 03.Mating the First Part.mp4	MP4	4.78 MB
03.CSWA Assembly Model - 04.Using SmartMates.mp4	MP4	5.39 MB
03.CSWA Assembly Model - 05.Mating the Remaining Components.mp4	MP4	10.24 MB
03.CSWA Assembly Model - 06.Answering the Question.mp4	MP4	5.9 MB
04.CSWA Drawings Questions - Multiple Choice - 01.Multiple Choice Section Overview.mp4	MP4	2.11 MB
04.CSWA Drawings Questions - Multiple Choice - 02.Model View.mp4	MP4	1.14 MB
04.CSWA Drawings Questions - Multiple Choice - 03.Projected View.mp4	MP4	1.16 MB
04.CSWA Drawings Questions - Multiple Choice - 04.Auxiliary View.mp4	MP4	895.14 KB
04.CSWA Drawings Questions - Multiple Choice - 05.Section View.mp4	MP4	1.57 MB
04.CSWA Drawings Questions - Multiple Choice - 06.Partial Section.mp4	MP4	1.14 MB
04.CSWA Drawings Questions - Multiple Choice - 07.Aligned Section.mp4	MP4	1.38 MB
04.CSWA Drawings Questions - Multiple Choice - 08.Broken Out Section.mp4	MP4	834.72 KB
04.CSWA Drawings Questions - Multiple Choice - 09.Detail View.mp4	MP4	561.34 KB
04.CSWA Drawings Questions - Multiple Choice - 10.Relative to Model.mp4	MP4	1.78 MB
04.CSWA Drawings Questions - Multiple Choice - 11.Standard 3 View.mp4	MP4	404.49 KB
04.CSWA Drawings Questions - Multiple Choice - 12.Break View.mp4	MP4	419.4 KB
04.CSWA Drawings Questions - Multiple Choice - 13.Cropped View.mp4	MP4	629.02 KB
04.CSWA Drawings Questions - Multiple Choice - 14.Alternate Position View.mp4	MP4	896.61 KB
04.CSWA Drawings Questions - Multiple Choice - 15.Empty View.mp4	MP4	989.2 KB
04.CSWA Drawings Questions - Multiple Choice - 16.Predefined View.mp4	MP4	1.62 MB
05.CSWP Part Model - 01.Problem Overview.mp4	MP4	3.96 MB
05.CSWP Part Model - 02.Developing a Strategy.mp4	MP4	6.83 MB
05.CSWP Part Model - 03.Where to Begin.mp4	MP4	6.58 MB
05.CSWP Part Model - 04.The Cylinder and Cone.mp4	MP4	8.33 MB
05.CSWP Part Model - 05.The Rectangular Flange.mp4	MP4	3.21 MB
05.CSWP Part Model - 06.The First Screw Lug.mp4	MP4	9.52 MB
05.CSWP Part Model - 07.The Screw Lug Pattern.mp4	MP4	5.25 MB
05.CSWP Part Model - 08.The Base Plate.mp4	MP4	5.08 MB
05.CSWP Part Model - 09.The Rib Structure.mp4	MP4	9.79 MB
05.CSWP Part Model - 10.The Foot Pads.mp4	MP4	5.28 MB
05.CSWP Part Model - 11.The Top Boss.mp4	MP4	9.22 MB
05.CSWP Part Model - 12.The Tapped Holes.mp4	MP4	3.89 MB
05.CSWP Part Model - 13.Adding Fillets.mp4	MP4	15.27 MB
05.CSWP Part Model - 14.Answering the Question.mp4	MP4	6.37 MB
06.CSWP Configurations and Part Modification - 01.Introduction to Configurations.mp4	MP4	1.35 MB
06.CSWP Configurations and Part Modification - 02.Configurations Question.mp4	MP4	2.37 MB
06.CSWP Configurations and Part Modification - 03.Adding and Modifying Configurations.mp4	MP4	6.29 MB
06.CSWP Configurations and Part Modification - 04.Design Table Question.mp4	MP4	4.06 MB
06.CSWP Configurations and Part Modification - 05.Part Modiication Question.mp4	MP4	2.71 MB
06.CSWP Configurations and Part Modification - 06.Part Modification Exercise.mp4	MP4	14.18 MB
07.CSWP Assembly Model - 01.Problem Overview.mp4	MP4	2.08 MB
07.CSWP Assembly Model - 02.Modeling the First Component.mp4	MP4	11.34 MB
07.CSWP Assembly Model - 03.Starting the Assembly.mp4	MP4	4.41 MB
07.CSWP Assembly Model - 04.Making Changes to the Model.mp4	MP4	2.68 MB
07.CSWP Assembly Model - 05.In-context Considerations.mp4	MP4	3.77 MB
07.CSWP Assembly Model - 06.Modeling the Slider.mp4	MP4	763 KB
07.CSWP Assembly Model - 07.Mating the First Slider.mp4	MP4	3.97 MB
07.CSWP Assembly Model - 08.Slider In-context Relations.mp4	MP4	4.55 MB
07.CSWP Assembly Model - 09.Adding the Second Slider.mp4	MP4	5.25 MB
07.CSWP Assembly Model - 10.Making a Change to the Assembly.mp4	MP4	4.92 MB
07.CSWP Assembly Model - 11.Modeling the Rotor Component.mp4	MP4	7.38 MB
07.CSWP Assembly Model - 12.Rotor - In-context Relation 1.mp4	MP4	2.74 MB
07.CSWP Assembly Model - 13.Rotor - In-context Relation 2.mp4	MP4	9.62 MB
07.CSWP Assembly Model - 14.Rotor - In-context Relation 3.mp4	MP4	10.79 MB
07.CSWP Assembly Model - 15.Testing In-context Relations.mp4	MP4	4.6 MB
07.CSWP Assembly Model - 16.Further Testing of In-context Relations.mp4	MP4	6.37 MB
07.CSWP Assembly Model - 17.Simulate Motion.mp4	MP4	9.44 MB
07.CSWP Assembly Model - 18.Other Possible Assembly Question Types.mp4	MP4	10.23 MB
07.CSWP Assembly Model - 19.Final Comments.mp4	MP4	1.52 MB
08.CSWE Sample Question Types - 01.CSWE Question Type Overview.mp4	MP4	1.55 MB
08.CSWE Sample Question Types - 02.Direct Editing Example.mp4	MP4	7.62 MB
08.CSWE Sample Question Types - 03.Advanced Feature Example.mp4	MP4	3.56 MB
08.CSWE Sample Question Types - 04.Advanced Reference Geometry Example.mp4	MP4	5.06 MB
08.CSWE Sample Question Types - 05.Multibody Techniques Example.mp4	MP4	4.03 MB
09.After the Exam - 01.How To View Your Exam Results.mp4	MP4	2.29 MB
09.After the Exam - 02.Accessing your Certificates and Logos.mp4	MP4	1020.7 KB
09.After the Exam - 03.Getting Listed in the Online Directory.mp4	MP4	933.47 KB

2013 Core Concepts

01.Introduction - 01.Course Introduction.mp4	MP4	1.29 MB
01.Introduction - 02.SolidWorks Overview.mp4	MP4	7.3 MB
01.Introduction - 03.Interface.mp4	MP4	8.12 MB
01.Introduction - 04.Task Pane Resources.mp4	MP4	4.19 MB
01.Introduction - 05.View Manipulation.mp4	MP4	8.79 MB
02.The Sketcher - 01.The Sketcher.mp4	MP4	6.36 MB
02.The Sketcher - 02.Lines.mp4	MP4	6.93 MB
02.The Sketcher - 03.Rectangles.mp4	MP4	4.22 MB
02.The Sketcher - 04.Circles & Arcs.mp4	MP4	9.09 MB
02.The Sketcher - 05.Automatic Relations.mp4	MP4	8.72 MB
02.The Sketcher - 06.Geometric Relations.mp4	MP4	6.98 MB
02.The Sketcher - 07.Dimensions.mp4	MP4	7.79 MB
02.The Sketcher - 08.Numeric Sketch Input.mp4	MP4	4.98 MB
02.The Sketcher - 09.Fully Deflned Sketches.mp4	MP4	4.23 MB
02.The Sketcher - 10.Over Defined Sketches.mp4	MP4	7.49 MB
02.The Sketcher - 11.Sketch Fillets.mp4	MP4	5.37 MB
02.The Sketcher - 12.Sketch Mirroring.mp4	MP4	1.73 MB
02.The Sketcher - 13.Sketch Patterns.mp4	MP4	6.08 MB
02.The Sketcher - 14.Offset Entities.mp4	MP4	1.82 MB
02.The Sketcher - 15.Trim Tools.mp4	MP4	3.35 MB
02.The Sketcher - 16.Convert Entities.mp4	MP4	5.17 MB
02.The Sketcher - 17.Sketches on Faces.mp4	MP4	3.1 MB
02.The Sketcher - 18.Rapid Sketch.mp4	MP4	3.05 MB
02.The Sketcher - 19.Sketched Text.mp4	MP4	2.2 MB
03.Sketched Features - 01.Sketched Features Introduction.mp4	MP4	702.57 KB
03.Sketched Features - 02.Extruded Boss.mp4	MP4	10.29 MB
03.Sketched Features - 03.Contours and Thin Features.mp4	MP4	3.99 MB
03.Sketched Features - 04.Extruded Cut.mp4	MP4	2.88 MB
03.Sketched Features - 05.Revolved Boss.mp4	MP4	4.06 MB
03.Sketched Features - 06.Revolved Cut.mp4	MP4	551.47 KB
03.Sketched Features - 07.Sweep.mp4	MP4	6.73 MB
03.Sketched Features - 08.Loft.mp4	MP4	8.43 MB
03.Sketched Features - 09.Ribs.mp4	MP4	6.77 MB
04.Applied Features - 01.Applied Features Introductlon.mp4	MP4	358.27 KB
04.Applied Features - 02.Fillets.mp4	MP4	8.98 MB
04.Applied Features - 03.Chamfers.mp4	MP4	5.2 MB
04.Applied Features - 04.Shell.mp4	MP4	4.75 MB
04.Applied Features - 05.3D Mirroring.mp4	MP4	3.32 MB
04.Applied Features - 06.Planes.mp4	MP4	3.39 MB
04.Applied Features - 07.Mirroring Bodies.mp4	MP4	1.24 MB
04.Applied Features - 08.Linear Patterns.mp4	MP4	3.86 MB
04.Applied Features - 09.Circular Patterns.mp4	MP4	1.84 MB
04.Applied Features - 10.Varying Patterns.mp4	MP4	5.56 MB
04.Applied Features - 11.Fill Patterns.mp4	MP4	5.46 MB
04.Applied Features - 12.Curve Driven Pattern.mp4	MP4	5.5 MB
04.Applied Features - 13.Creating Axes.mp4	MP4	1.83 MB
04.Applied Features - 14.Planes 2.mp4	MP4	4.8 MB
04.Applied Features - 15.Hole Wizard.mp4	MP4	6.25 MB
04.Applied Features - 16.Draft.mp4	MP4	4.25 MB
05.Parts - 01.Introducing Parts.mp4	MP4	1.53 MB
05.Parts - 02.Starting a Part.mp4	MP4	4.17 MB
05.Parts - 03.Picking a Plane.mp4	MP4	2.72 MB
05.Parts - 04.Design Intent.mp4	MP4	9.78 MB
05.Parts - 05.Symmetry A.mp4	MP4	7.22 MB
05.Parts - 06.Symmetry B.mp4	MP4	7.92 MB
05.Parts - 07.Editing Parts.mp4	MP4	7.25 MB
05.Parts - 08.Instant 3D.mp4	MP4	4.93 MB
05.Parts - 09.Feature Suppression.mp4	MP4	2.47 MB
05.Parts - 10.Parent Child Relations.mp4	MP4	4.52 MB
05.Parts - 11.Measure.mp4	MP4	5.56 MB
05.Parts - 12.Materials.mp4	MP4	7.29 MB
05.Parts - 13.Mass Properties.mp4	MP4	4.08 MB
05.Parts - 14.Custom Properties.mp4	MP4	3.81 MB
05.Parts - 15.Configurations - Intro.mp4	MP4	4.7 MB
05.Parts - 16.Configurations - Dim Changes.mp4	MP4	5.62 MB
05.Parts - 17.Configurations - Feat. Supp..mp4	MP4	5.12 MB
05.Parts - 18.Configurations - Table.mp4	MP4	7.05 MB
05.Parts - 19.Design Tables - Intro.mp4	MP4	1.95 MB
05.Parts - 20.Design Tables - Rename Dims.mp4	MP4	5.07 MB
05.Parts - 21.Design Tables - Creating.mp4	MP4	4.51 MB
05.Parts - 22.Design Tables for Features.mp4	MP4	6 MB
06.Assemblies - 01.Introducing Assemblies.mp4	MP4	600.44 KB
06.Assemblies - 02.Starting an Assembly.mp4	MP4	3.17 MB
06.Assemblies - 03.Inserting Components.mp4	MP4	3.75 MB
06.Assemblies - 04.Positioning Parts.mp4	MP4	4.59 MB
06.Assemblies - 05.Adding Mates.mp4	MP4	6.8 MB
06.Assemblies - 06.Coincident Mate.mp4	MP4	3.48 MB
06.Assemblies - 07.Distance Mate.mp4	MP4	929.74 KB
06.Assemblies - 08.Concentric Mate.mp4	MP4	745.8 KB
06.Assemblies - 09.Tangent Mate.mp4	MP4	1.47 MB
06.Assemblies - 10.Smart Mates.mp4	MP4	4.83 MB
06.Assemblies - 11.Multiple Mate Mode.mp4	MP4	3.64 MB
06.Assemblies - 13.Assembly Appearances.mp4	MP4	4.76 MB
06.Assemblies - 14.Hide and Show Components.mp4	MP4	4.86 MB
06.Assemblies - 15.Interference Detection.mp4	MP4	7.64 MB
06.Assemblies - 16.Collision Detection.mp4	MP4	3.18 MB
06.Assemblies - 17.Dynamic Clearance.mp4	MP4	2.05 MB
06.Assemblies - 18.Exploding Assemblies.mp4	MP4	6.02 MB
06.Assemblies - 19.Intro to Top Down Design I.mp4	MP4	4.49 MB
06.Assemblies - 20.Intro to Top Down Design II.mp4	MP4	2.76 MB
06.Assemblies - 21.Assembly Bill of Materials.mp4	MP4	4.24 MB

2013 Drawings

01.Drawings - 01.Intro to Drawings.mp4	MP4	7.36 MB
01.Drawings - 02.Model View.mp4	MP4	7.8 MB
01.Drawings - 03.Projected View.mp4	MP4	1.03 MB
01.Drawings - 04.Auxiliary View.mp4	MP4	1.42 MB
01.Drawings - 05.Section Views I.mp4	MP4	4.08 MB
01.Drawings - 06.Section Views II.mp4	MP4	7.68 MB
01.Drawings - 07.Assembly Section View.mp4	MP4	3.04 MB
01.Drawings - 08.Detail View.mp4	MP4	2.69 MB
01.Drawings - 09.Broken View.mp4	MP4	1.75 MB
01.Drawings - 10.Assembly Exploded View.mp4	MP4	3.58 MB
01.Drawings - 11.Display Options.mp4	MP4	1.91 MB
01.Drawings - 12.View Alignment.mp4	MP4	1.4 MB
01.Drawings - 13.Scale.mp4	MP4	2.83 MB
01.Drawings - 14.Dimensions.mp4	MP4	4.6 MB
01.Drawings - 15.Driving Dimensions.mp4	MP4	5.89 MB
01.Drawings - 16.Driven Dimensions.mp4	MP4	4.71 MB
01.Drawings - 17.Ordinate Dimensions.mp4	MP4	2.08 MB
01.Drawings - 18.Baseline Dimensions.mp4	MP4	2.56 MB
01.Drawings - 19.Centermarks.mp4	MP4	3.81 MB
01.Drawings - 20.Note Annotations.mp4	MP4	8.8 MB
01.Drawings - 21.Bill of Materials.mp4	MP4	5.42 MB
01.Drawings - 22.BOMs - Advanced Options.mp4	MP4	6.14 MB
01.Drawings - 23.Linking BOMS.mp4	MP4	4.63 MB
01.Drawings - 24.Balloons.mp4	MP4	5.46 MB
01.Drawings - 25.Magnetic Lines.mp4	MP4	7.18 MB
01.Drawings - 26.Create Custom Templates.mp4	MP4	5.78 MB
01.Drawings - 27.Custom Sheet Format.mp4	MP4	4.04 MB
01.Drawings - 28.Custom Properties ang! Parametrnc Notes.mp4	MP4	7.47 MB
01.Drawings - 29.Formatting Dimensions.mp4	MP4	3.84 MB

2013 File Management

01.File Management - 01.File Relationships.mp4	MP4	6.76 MB
01.File Management - 02.References.mp4	MP4	7.81 MB
01.File Management - 03.Renaming Parts - Save As.mp4	MP4	7.1 MB
01.File Management - 04.Renaming Parts - SolidWorks Explorer.mp4	MP4	4.15 MB
01.File Management - 05.Document Revisions A.mp4	MP4	3.04 MB
01.File Management - 06.Document Revisions B.mp4	MP4	6.8 MB
01.File Management - 07.Reloading and Replacing.mp4	MP4	4.56 MB

2013 Intro To eDrawings

01.Introduction to eDrawings - 01.eDrawings Overview.mp4	MP4	15.1 MB
01.Introduction to eDrawings - 02.Embedding and Sharing eDrawings files.mp4	MP4	6.32 MB
01.Introduction to eDrawings - 03.Additional Options and Saving as HTML.mp4	MP4	7.89 MB
01.Introduction to eDrawings - 04.Professional and Premium Options.mp4	MP4	7.49 MB

2013 Mold Tools And Plastic Design

01.Mold Tools - Core and Cavity - 01.Draft Analysis A.mp4	MP4	12.83 MB
01.Mold Tools - Core and Cavity - 02.Draft Analysis B.mp4	MP4	2.44 MB
01.Mold Tools - Core and Cavity - 03.Scale.mp4	MP4	3.31 MB
01.Mold Tools - Core and Cavity - 04.Parting Lines.mp4	MP4	4.39 MB
01.Mold Tools - Core and Cavity - 05.Shut Off Surfaces.mp4	MP4	5.51 MB
01.Mold Tools - Core and Cavity - 06.Parting Surface.mp4	MP4	2.33 MB
01.Mold Tools - Core and Cavity - 07.Creating the Mold.mp4	MP4	6.43 MB
01.Mold Tools - Core and Cavity - 08.Side Cores A.mp4	MP4	5.94 MB
01.Mold Tools - Core and Cavity - 09.Side Cores B.mp4	MP4	6.56 MB
01.Mold Tools - Core and Cavity - 10.Intersect.mp4	MP4	2.21 MB
02.Fastening Features - 01.Mounting Boss.mp4	MP4	6.56 MB
02.Fastening Features - 02.Snap Hook.mp4	MP4	3.3 MB
02.Fastening Features - 03.Snap Groove.mp4	MP4	5.11 MB
02.Fastening Features - 04.Vent Feature.mp4	MP4	4.37 MB
02.Fastening Features - 05.Lip and Groove.mp4	MP4	7.47 MB

2013 PhotoView 360

01.PhotoView 360 Basics - 01.Introduction.mp4	MP4	2.7 MB
01.PhotoView 360 Basics - 02.Scene Settings.mp4	MP4	5.82 MB
01.PhotoView 360 Basics - 03.APP_ying Appearances.mp4	MP4	4.44 MB
01.PhotoView 360 Basics - 04.Orienting the Model.mp4	MP4	1.4 MB
01.PhotoView 360 Basics - 05.Creating a Camera.mp4	MP4	7.29 MB
01.PhotoView 360 Basics - 06.Rendering the Image.mp4	MP4	8.35 MB
02.Exercises and Techniques - 01.Satellite Receiver - Part 1 Standard and Custom Views.mp4	MP4	5 MB
02.Exercises and Techniques - 02.Satellite Receiver - Part 2 Adding Blooms.mp4	MP4	2.29 MB
02.Exercises and Techniques - 03.Beer Bottle - Part 1 Decals.mp4	MP4	2.23 MB
02.Exercises and Techniques - 04.Beer Bottle - Part 2 Setting up the Scene.mp4	MP4	5.82 MB
02.Exercises and Techniques - 05.Beer Bottle - Part 3 Caustics and Rendering.mp4	MP4	6.73 MB

2013 Sheet Metal

01.Sheet Metal Design - 01.Introduction to Sheet Metal.mp4	MP4	1.55 MB
01.Sheet Metal Design - 02.Base Flange 1.mp4	MP4	6.51 MB
01.Sheet Metal Design - 03.Base Flange 2.mp4	MP4	5.6 MB
01.Sheet Metal Design - 04.Bend Allowance.mp4	MP4	3.71 MB
01.Sheet Metal Design - 05.Bend Tables.mp4	MP4	4.82 MB
01.Sheet Metal Design - 06.Flat Pattern Options.mp4	MP4	7.59 MB
01.Sheet Metal Design - 07.Corner Trim.mp4	MP4	4.86 MB
01.Sheet Metal Design - 08.Edge Flange 1.mp4	MP4	5.96 MB
01.Sheet Metal Design - 09.Edge Flange 2.mp4	MP4	5.64 MB
01.Sheet Metal Design - 10.Edge Flange 3.mp4	MP4	3.16 MB
01.Sheet Metal Design - 11.Miter Flange.mp4	MP4	8.67 MB
01.Sheet Metal Design - 12.Swept Flange.mp4	MP4	6.89 MB
01.Sheet Metal Design - 13.Tab.mp4	MP4	2.09 MB
01.Sheet Metal Design - 14.Sketched Bend.mp4	MP4	3.84 MB
01.Sheet Metal Design - 15.Jog.mp4	MP4	4.89 MB
01.Sheet Metal Design - 16.Hem.mp4	MP4	3.25 MB
01.Sheet Metal Design - 17.Closed Corner.mp4	MP4	5.28 MB
01.Sheet Metal Design - 18.Break Corner.mp4	MP4	1.79 MB
01.Sheet Metal Design - 19.Fold and Unfold.mp4	MP4	3.16 MB
01.Sheet Metal Design - 20.Sheet Metal Cuts.mp4	MP4	3.98 MB
01.Sheet Metal Design - 21.Cuts Across Bends.mp4	MP4	4.78 MB
01.Sheet Metal Design - 22.Cross Breaks.mp4	MP4	4.4 MB
01.Sheet Metal Design - 23.Cones and Cylinders.mp4	MP4	4.33 MB
01.Sheet Metal Design - 24.Lofted Bends.mp4	MP4	3.53 MB
01.Sheet Metal Design - 25.Multibody Sheet Metal Parts.mp4	MP4	12.96 MB
02.Library Features - 01.Design Library - Cuts.mp4	MP4	2.04 MB
02.Library Features - 02.Forming Tools.mp4	MP4	2.51 MB
02.Library Features - 03.Forming Tools vs Derived Parts.mp4	MP4	4.84 MB
02.Library Features - 04.Modifying Forming Tools.mp4	MP4	7.82 MB
02.Library Features - 05.Creating New Forming Tools.mp4	MP4	8.47 MB
03.Convert to Sheet Metal - 01.Convert to Sheet Metal.mp4	MP4	9.27 MB
03.Convert to Sheet Metal - 02.The Rip Feature.mp4	MP4	6.44 MB
03.Convert to Sheet Metal - 03.Insert Bends.mp4	MP4	5.29 MB
04.Sheet Metal Drawings - 01.Sheet Metal Drawings.mp4	MP4	5.33 MB
04.Sheet Metal Drawings - 02.Punch Tables.mp4	MP4	5.53 MB
04.Sheet Metal Drawings - 03.Export to DXF-DWG.mp4	MP4	2.67 MB

2013 SimulationXpress

01.SimulationXpress - 01.Overview.mp4	MP4	2.85 MB
01.SimulationXpress - 02.Assumptions.mp4	MP4	5.93 MB
01.SimulationXpress - 03.Starting an Analysis.mp4	MP4	3.56 MB
01.SimulationXpress - 04.Units.mp4	MP4	1.99 MB
01.SimulationXpress - 05.Applying Fixtures.mp4	MP4	7.74 MB
01.SimulationXpress - 06.Applying Loads.mp4	MP4	8.72 MB
01.SimulationXpress - 07.Applying a Material.mp4	MP4	3.31 MB
01.SimulationXpress - 08.Running the Simulation.mp4	MP4	6.02 MB
01.SimulationXpress - 09.Interpreting Results - Stress and Dlsplacement.mp4	MP4	7.9 MB
01.SimulationXpress - 10.Factor of Safety.mp4	MP4	5.23 MB
01.SimulationXpress - 11.Output and Reports.mp4	MP4	4.27 MB
01.SimulationXpress - 12.Optimizing a Design.mp4	MP4	8.23 MB
01.SimulationXpress - 13.Summary.mp4	MP4	1.64 MB
02.Exercises - 01.Exercise Introduction.mp4	MP4	1.03 MB
02.Exercises - 02.Exercise I - Crank Shaft.mp4	MP4	14.58 MB
02.Exercises - 03.Exercise II - Pipe Reducer.mp4	MP4	19.16 MB
03.Appendix - 01.Custom Materials.mp4	MP4	3.88 MB
03.Appendix - 02.Split Line.mp4	MP4	4.04 MB

2013 SolidWorks For Beginners

01.Overview - 01.About this Course.mp4	MP4	6.28 MB
01.Overview - 02.What is SolidWorks_.mp4	MP4	1.66 MB
01.Overview - 03.Interface Tour.mp4	MP4	9.05 MB
01.Overview - 04.View Manipulation.mp4	MP4	12.08 MB
02.Intro to Part Design - 01.Starting a Part.mp4	MP4	4.25 MB
02.Intro to Part Design - 02.Starting a Sketch.mp4	MP4	12.78 MB
02.Intro to Part Design - 03.Sketch Tools.mp4	MP4	15.49 MB
02.Intro to Part Design - 04.Geometric Relations.mp4	MP4	16.47 MB
02.Intro to Part Design - 05.Dimensions.mp4	MP4	14.2 MB
02.Intro to Part Design - 06.Extrude Feature.mp4	MP4	6.14 MB
02.Intro to Part Design - 07.Editing Geometry.mp4	MP4	5.5 MB
03.Bracket - 01.Overview of Design.mp4	MP4	9.39 MB
03.Bracket - 02.Creating the Base Feature.mp4	MP4	7.71 MB
03.Bracket - 03.The Tab.mp4	MP4	27.46 MB
03.Bracket - 04.Hole in Tab.mp4	MP4	9.93 MB
03.Bracket - 05.Mirror Feature.mp4	MP4	5.55 MB
03.Bracket - 06.Rollback Bar and Order of Features.mp4	MP4	6.47 MB
03.Bracket - 07.Hole Wizard.mp4	MP4	14.63 MB
03.Bracket - 08.Fillets.mp4	MP4	11.55 MB
04.Wheel - 01.Revolve Feature.mp4	MP4	22.94 MB
04.Wheel - 02.Cutout and Circular Pattern.mp4	MP4	6.13 MB
05.Assemblies - 01.Assembly Overview.mp4	MP4	2.69 MB
05.Assemblies - 02.Starting an Assembly.mp4	MP4	7.2 MB
05.Assemblies - 03.Inserting Additional Components.mp4	MP4	4.95 MB
05.Assemblies - 04.Move Components.mp4	MP4	7.91 MB
05.Assemblies - 05.Mating the Wheel.mp4	MP4	16.59 MB
05.Assemblies - 06.Mating the Pin.mp4	MP4	8.73 MB
05.Assemblies - 07.Toolbox.mp4	MP4	8.94 MB
05.Assemblies - 08.Exploded View.mp4	MP4	7.96 MB
05.Assemblies - 09.Working With Sub-Assemblies.mp4	MP4	6.01 MB
06.Drawings - 01.Drawings Overview - Starting a New Drawing.mp4	MP4	5.99 MB
06.Drawings - 02.Model Views.mp4	MP4	12.62 MB
06.Drawings - 03.Projected Views.mp4	MP4	2.2 MB
06.Drawings - 04.Model Items.mp4	MP4	7.21 MB
06.Drawings - 05.Dimensions.mp4	MP4	4.59 MB
06.Drawings - 06.Associativity.mp4	MP4	3.8 MB
06.Drawings - 07.Annotations.mp4	MP4	5.8 MB
06.Drawings - 08.Detail View.mp4	MP4	4.57 MB
06.Drawings - 09.Section View.mp4	MP4	5.65 MB
06.Drawings - 10.Assembly Drawing.mp4	MP4	8.89 MB
06.Drawings - 11.Bill of Materials.mp4	MP4	7 MB
06.Drawings - 12.Balloons.mp4	MP4	5.65 MB

2013 Surfacing Essentials

01.Surfacing - 01.What is a Surface.mp4	MP4	2.56 MB
01.Surfacing - 02.Basic Surfaces.mp4	MP4	6.02 MB
01.Surfacing - 03.Planar Surfaces.mp4	MP4	1.67 MB
01.Surfacing - 04.Ruled Surfaces Part A.mp4	MP4	4.08 MB
01.Surfacing - 05.Ruled Surfaces Part B.mp4	MP4	6.64 MB
01.Surfacing - 06.Offset Surfaces.mp4	MP4	1.62 MB
01.Surfacing - 07.Knit Surfaces.mp4	MP4	5.68 MB
01.Surfacing - 08.Trimming Surfaces Part A.mp4	MP4	5.5 MB
01.Surfacing - 09.Trimming Surfaces Part B.mp4	MP4	5.03 MB
01.Surfacing - 10.Extending Surfaces.mp4	MP4	2.28 MB
01.Surfacing - 11.Untrimming Surfaces.mp4	MP4	3.98 MB
01.Surfacing - 12.Deleting Holes.mp4	MP4	2.75 MB
01.Surfacing - 13.Surface to Solid Conversion.mp4	MP4	6.37 MB
01.Surfacing - 14.Filled Surfaces.mp4	MP4	5.51 MB
01.Surfacing - 15.Delete Faces.mp4	MP4	3.83 MB
01.Surfacing - 16.Move Faces.mp4	MP4	1.37 MB
01.Surfacing - 17.Replace Face.mp4	MP4	2.64 MB
01.Surfacing - 18.Cutting with Surface.mp4	MP4	2.6 MB
01.Surfacing - 19.Freeforms Part A.mp4	MP4	7.84 MB
01.Surfacing - 20.Freeforms Part B.mp4	MP4	7.89 MB
01.Surfacing - 21.Boundary Surfaces.mp4	MP4	4.28 MB

2013 TolAnalyst

01.DimXpert - 01.Course Introduction.mp4	MP4	4.29 MB
01.DimXpert - 02.Overview of DimXpert.mp4	MP4	3.24 MB
01.DimXpert - 03.Auto Dimension.mp4	MP4	10.01 MB
01.DimXpert - 04.Datums.mp4	MP4	3.66 MB
01.DimXpert - 05.SizeDimensions.mp4	MP4	3.48 MB
01.DimXpert - 06.Location Dimension.mp4	MP4	3.32 MB
01.DimXpert - 07.Geometric Tolerance.mp4	MP4	3.38 MB
01.DimXpert - 08.Tolerance Status.mp4	MP4	3.74 MB
01.DimXpert - 09.DimXpert Options.mp4	MP4	4.89 MB
01.DimXpert - 10.Using DimXpert Information in Drawings.mp4	MP4	2.88 MB
01.DimXpert - 11.Pattern Feature.mp4	MP4	5.69 MB
01.DimXpert - 12.DimXpert Exercise - Part I.mp4	MP4	10.23 MB
01.DimXpert - 13.DimXpert Exercise - Part II.mp4	MP4	6.91 MB
02.TolAnalyst - 01.ToIAnaIyst Overview.mp4	MP4	2.44 MB
02.TolAnalyst - 02.Establishing a Measurement.mp4	MP4	4 MB
02.TolAnalyst - 03.Assembly Sequence.mp4	MP4	1.88 MB
02.TolAnalyst - 04.Assembly Constraints.mp4	MP4	4.7 MB
02.TolAnalyst - 05.Analyzing Results.mp4	MP4	5.48 MB
02.TolAnalyst - 06.Floating vs Fixed Fasteners.mp4	MP4	4.04 MB
02.TolAnalyst - 07.TolAnalyst Exercise.mp4	MP4	8.57 MB

2013 Toolbox and Design Library

01.The Design Library - 01.Introduction.mp4	MP4	1.46 MB
01.The Design Library - 02.Applying Library Features.mp4	MP4	3.4 MB
01.The Design Library - 03.Adding Custom Features to the Library.mp4	MP4	5.97 MB
01.The Design Library - 04.Editing and Locating the Library Feature.mp4	MP4	2.74 MB
01.The Design Library - 05.Changes to Library Features.mp4	MP4	3.69 MB
02.Toolbox - 01.Toolbox Overview.mp4	MP4	3.74 MB
02.Toolbox - 02.Setting Up and Adding in the Toolbox.mp4	MP4	6.98 MB
02.Toolbox - 03.Inserting Toolbox Components.mp4	MP4	4.47 MB
02.Toolbox - 04.Replacing Hardware.mp4	MP4	3.23 MB
02.Toolbox - 05.Hardware Stackups.mp4	MP4	7.01 MB
02.Toolbox - 06.Smart Components.mp4	MP4	11.51 MB
02.Toolbox - 07.Other Tools.mp4	MP4	2.9 MB
02.Toolbox - 08.Toolbox Settings.mp4	MP4	9.11 MB

2013 Update Training

01.Fundamentals - 01.Working with Files in 2013.mp4	MP4	5.43 MB
01.Fundamentals - 02.Interface.mp4	MP4	5.12 MB
01.Fundamentals - 03.View Manipulation.mp4	MP4	9.77 MB
01.Fundamentals - 04.Measure Tool.mp4	MP4	2.77 MB
01.Fundamentals - 05.Searching Options and Sounds.mp4	MP4	1.93 MB
01.Fundamentals - 06.Appearances.mp4	MP4	7.95 MB
01.Fundamentals - 07.PhotoView 360.mp4	MP4	4.31 MB
01.Fundamentals - 08.CAD Admin Dashboard.mp4	MP4	9.38 MB
02.Sketching - 01.Conic Curves.mp4	MP4	8.87 MB
02.Sketching - 02.Sketch Dimension Input.mp4	MP4	2.85 MB
03.Parts and Features - 01.Direct Input of Equations.mp4	MP4	1.94 MB
03.Parts and Features - 02.Intersect.mp4	MP4	6.09 MB
03.Parts and Features - 03.Multibody Library Features.mp4	MP4	3.13 MB
03.Parts and Features - 04.Configuration Switching.mp4	MP4	2.5 MB
03.Parts and Features - 05.Linear Patterns.mp4	MP4	5.37 MB
03.Parts and Features - 06.Center of Mass.mp4	MP4	6.18 MB
03.Parts and Features - 07.Defeature Linking.mp4	MP4	3.77 MB
03.Parts and Features - 08.Weldment Bounding Boxes.mp4	MP4	3.06 MB
03.Parts and Features - 09.Design Tables for Materials.mp4	MP4	1.41 MB
03.Parts and Features - 10.Mounting Boss.mp4	MP4	5.07 MB
03.Parts and Features - 11.Thin Extrudes.mp4	MP4	3.22 MB
04.Assemblies - 01.Inserting Components.mp4	MP4	5.37 MB
04.Assemblies - 02.Assembly Visualization.mp4	MP4	6.09 MB
04.Assemblies - 03.Breaking References.mp4	MP4	3.85 MB
04.Assemblies - 04.Envelopes.mp4	MP4	6.27 MB
04.Assemblies - 05.Subassemblies.mp4	MP4	5.03 MB
04.Assemblies - 06.Multiple Exglodeq Views per Configuratlon.mp4	MP4	2.9 MB
04.Assemblies - 07.Interference Detection.mp4	MP4	5.29 MB
04.Assemblies - 08.Large Assemblies.mp4	MP4	4.03 MB
04.Assemblies - 09.Snapshots.mp4	MP4	9.05 MB
04.Assemblies - 10.Swept Cut.mp4	MP4	2.45 MB
04.Assemblies - 11.SpeedPak.mp4	MP4	6.85 MB
05.Drawings and Detailing - 01.Balloons.mp4	MP4	5.13 MB
05.Drawings and Detailing - 02.Dimensions.mp4	MP4	9.59 MB
05.Drawings and Detailing - 03.Section Views.mp4	MP4	5.77 MB
05.Drawings and Detailing - 04.Convert Drawing View to Sketch and Save as DWG.mp4	MP4	4.43 MB
05.Drawings and Detailing - 05.Convert Drawing View to Sketch and Block.mp4	MP4	4.02 MB
05.Drawings and Detailing - 06.Layers.mp4	MP4	6.1 MB
05.Drawings and Detailing - 07.Annotations.mp4	MP4	11.86 MB
05.Drawings and Detailing - 08.JIS Weld Symbols.mp4	MP4	2.87 MB
05.Drawings and Detailing - 09.Tables.mp4	MP4	4.72 MB
06.Sheet Metal - 01.Bend Notes.mp4	MP4	4.58 MB
06.Sheet Metal - 02.Forming Tools.mp4	MP4	5.93 MB
06.Sheet Metal - 03.Multibody Sheet Metal Parts.mp4	MP4	4.69 MB
07.Routing - 01.Routing General Enhancements.mp4	MP4	5.43 MB
07.Routing - 02.AutoRoute.mp4	MP4	4.76 MB
07.Routing - 03.Tubing Drawings.mp4	MP4	4.18 MB
07.Routing - 04.Slopes for Pipe Routes.mp4	MP4	5.27 MB
07.Routing - 05.Ribbon Cables.mp4	MP4	3.62 MB
08.Simulation - 01.General Enhancements and Interface.mp4	MP4	3.77 MB
08.Simulation - 02.Beams.mp4	MP4	4.59 MB
08.Simulation - 03.Contact.mp4	MP4	3.25 MB
08.Simulation - 04.Design Studies (Materials).mp4	MP4	5.56 MB
08.Simulation - 05.Results.mp4	MP4	3.9 MB

2013 Visualization And Appearances

01.Appearances - 01.Introduction.mp4	MP4	2.92 MB
01.Appearances - 02.Appearances - Part A.mp4	MP4	4.57 MB
01.Appearances - 03.Appearances - Part B.mp4	MP4	4.26 MB
01.Appearances - 04.Copy and Paste Options.mp4	MP4	4.13 MB
01.Appearances - 05.Textural Appearances.mp4	MP4	4.96 MB
01.Appearances - 06.Advanced Mapping Options.mp4	MP4	6.1 MB
01.Appearances - 07.Surface Properties.mp4	MP4	5.54 MB
01.Appearances - 08.Appearance Illumination.mp4	MP4	1.1 MB
02.Scenes - 01.Scenes Overview.mp4	MP4	1.87 MB
02.Scenes - 02.Editing Scenes.mp4	MP4	2.75 MB
02.Scenes - 03.Background Images.mp4	MP4	3.53 MB
02.Scenes - 04.Adding Depth.mp4	MP4	8.62 MB
02.Scenes - 05.Environment Images.mp4	MP4	3.52 MB
03.Lights - 01.What are Lights.mp4	MP4	4.5 MB
03.Lights - 02.Ambient Light.mp4	MP4	3.69 MB
03.Lights - 03.Directional Light.mp4	MP4	5.81 MB
03.Lights - 04.Point Light.mp4	MP4	4.29 MB
03.Lights - 05.Spot Light.mp4	MP4	6.24 MB
04.Views - 01.Standard Views.mp4	MP4	5.77 MB
04.Views - 02.Custom Views.mp4	MP4	3.59 MB
04.Views - 03.Viewports.mp4	MP4	2.7 MB
04.Views - 04.Updating Views.mp4	MP4	3.7 MB
04.Views - 05.The View Cube.mp4	MP4	1.4 MB
05.Cameras - 01.Introducing Cameras.mp4	MP4	1.86 MB
05.Cameras - 02.Adding Cameras.mp4	MP4	7.97 MB
05.Cameras - 03.Showing Cameras.mp4	MP4	2.97 MB
05.Cameras - 04.Camera View.mp4	MP4	1.67 MB
05.Cameras - 05.Walkthroughs.mp4	MP4	10.34 MB
06.Decals - 01.Introduction to Decals.mp4	MP4	970.51 KB
06.Decals - 02.Decal Editor.mp4	MP4	1005.91 KB
06.Decals - 03.Creating Decals.mp4	MP4	4.46 MB
06.Decals - 04.Applyil1g Decals.mp4	MP4	2.95 MB
06.Decals - 05.Mapping Decals.mp4	MP4	4.94 MB
06.Decals - 06.Decal Illumination.mp4	MP4	2.59 MB
06.Decals - 07.Masking.mp4	MP4	4.3 MB
07.Display States - 01.What is a Display State.mp4	MP4	1.34 MB
07.Display States - 02.Adding Display States.mp4	MP4	5.22 MB
07.Display States - 03.Assembly Display States.mp4	MP4	6.17 MB

2013 Visualization and Appearance

01.Appearances - 01.Introduction.mp4	MP4	2.92 MB
01.Appearances - 02.Appearances - Part A.mp4	MP4	4.57 MB
01.Appearances - 03.Appearances - Part B.mp4	MP4	4.26 MB
01.Appearances - 04.Copy and Paste Options.mp4	MP4	4.13 MB
01.Appearances - 05.Textural Appearances.mp4	MP4	4.96 MB
01.Appearances - 06.Advanced Mapping Options.mp4	MP4	6.1 MB
01.Appearances - 07.Surface Properties.mp4	MP4	5.54 MB
01.Appearances - 08.Appearance Illumination.mp4	MP4	1.1 MB
02.Scenes - 01.Scenes Overview.mp4	MP4	1.87 MB
02.Scenes - 02.Editing Scenes.mp4	MP4	2.75 MB
02.Scenes - 03.Background Images.mp4	MP4	3.53 MB
02.Scenes - 04.Adding Depth.mp4	MP4	8.62 MB
02.Scenes - 05.Environment Images.mp4	MP4	3.52 MB
03.Lights - 01.What are Lights.mp4	MP4	4.5 MB
03.Lights - 02.Ambient Light.mp4	MP4	3.69 MB
03.Lights - 03.Directional Light.mp4	MP4	5.81 MB
03.Lights - 04.Point Light.mp4	MP4	4.29 MB
03.Lights - 05.Spot Light.mp4	MP4	6.24 MB
04.Views - 01.Standard Views.mp4	MP4	5.77 MB
04.Views - 02.Custom Views.mp4	MP4	3.59 MB
04.Views - 03.Viewports.mp4	MP4	2.7 MB
04.Views - 04.The View Cube.mp4	MP4	1.4 MB
05.Cameras - 01.Introducing Cameras.mp4	MP4	1.86 MB
05.Cameras - 02.Adding Cameras.mp4	MP4	7.97 MB
05.Cameras - 03.Showing Cameras.mp4	MP4	2.97 MB
05.Cameras - 04.Camera View.mp4	MP4	1.67 MB
05.Cameras - 05.Walkthroughs.mp4	MP4	10.34 MB
06.Decals - 01.Introduction to Decals.mp4	MP4	970.51 KB
06.Decals - 02.Decal Editor.mp4	MP4	1005.91 KB
06.Decals - 03.Creating Decals.mp4	MP4	4.46 MB
06.Decals - 04.Applyil1g Decals.mp4	MP4	2.95 MB
06.Decals - 05.Mapping Decals.mp4	MP4	4.94 MB
06.Decals - 06.Decal Illumination.mp4	MP4	2.59 MB
06.Decals - 07.Masking.mp4	MP4	4.3 MB
07.Display States - 01.What is a Display State.mp4	MP4	1.34 MB
07.Display States - 02.Adding Display States.mp4	MP4	5.22 MB
07.Display States - 03.Assembly Display States.mp4	MP4	6.17 MB

2013 Weldments

01.Weldments - 01.Introduction.mp4	MP4	2.62 MB
01.Weldments - 02.Structural Members.mp4	MP4	8.8 MB
01.Weldments - 03.Layout Sketches.mp4	MP4	6.52 MB
01.Weldments - 04.Trim and Extend Part A.mp4	MP4	6.83 MB
01.Weldments - 05.Trim and Extend Part B.mp4	MP4	9.09 MB
01.Weldments - 06.Plates and Fillet Beads.mp4	MP4	5.33 MB
01.Weldments - 07.Gussets and End Caps.mp4	MP4	9.09 MB
01.Weldments - 08.Weld Beads.mp4	MP4	11.47 MB
01.Weldments - 09.Weldment Bounding Boxes.mp4	MP4	2.96 MB
01.Weldments - 10.Cut Lists - Part A.mp4	MP4	7.88 MB
01.Weldments - 11.Cut Lists - Part B.mp4	MP4	4.47 MB
01.Weldments - 12.Weld Tables.mp4	MP4	3.24 MB
01.Weldments - 13.Creating Sub Weldments.mp4	MP4	7.92 MB
01.Weldments - 14.Creating Custom Profiles.mp4	MP4	4.36 MB

Description

									Show full description
								

SolidProfessor Solidworks Video Training 2013

Torrent Contents Size: 5.66 GB

Description

Location

Trackers

Latest News

Latest Searches

Sites In Our Index

Popular Tags

Tracker name
udp://tracker.coppersurfer.tk:6969/announce
udp://9.rarbg.me:2850/announce
udp://9.rarbg.to:2920/announce
udp://tracker.opentrackr.org:1337
udp://tracker.leechers-paradise.org:6969/announce